RV conversion kits for standard vans
The RV conversion kits are designed for standard vans from Renault, Fiat, Peugeot, Volkswagen and similar. Individual components can be quickly installed and removed, so if necessary, the van can serve both for leisure and for normal operation. All outdoor and indoor facilities are constructed from stainless steel. By this is achieved low weight, high strength and virtually indestructibility. The inner space is equipped by carpeted double floor. Double walls are thermally insulated with polyurethane and coated with self-adhesive foil. We supply both individual components for the conversion by yourself as a complete conversion by us. Prices of components are listed below.
Conversion of exterior
1/ Awning | 2/ Outdoor table and chairs |
3/ Roof rack, reserve tire holder | bicycle carrier |
4/ Air condition and ventilation unit | |
5/ Additional roof and side windows installation
Conversion of interior
1/ Shower with toilet | 2/ Water tank |
3/ Sink with a gas stove and fridge | |
4/ Folding beds | |
5/ Cabinets | |
6/ Folding table and seats | |
7/ Heating | |
8/ Curtains | |
9/ Raised floor | |
Price list | |
---|---|
Awning (by supplier) | 480 EUR (c.) |
Outdoor table (400x1200mm) | 136 EUR |
Roof rack and spare tire holder | 584 EUR |
Bicycle carrier (by supplier) | 200 EUR (c.) |
Air condition and ventilation unit | 760 EUR |
Shower with toilet (700x900mm) | 960 EUR |
Water tank 120lt.(compressor included) | 336 EUR |
Sink with a gas stove and fridge (800x500mm) | 560 EUR |
Folding bed (760x1800mm) | 312 EUR |
Cabinet (1000x300x300mm) | 188 EUR |
Folding table and seats | 184 EUR |
Wiring (by situation) | 960 EUR (c.) |
Raised floor (Al plate 3mm with "tear" pattern) | 500 EUR |
Wall coverings (including insulation) | 1 080 EUR |